Pelonis 7 Fin Electric Radiator Heater Manual

The Pelonis 7 Fin Electric Radiator Heater is designed to provide efficient heating for small to medium-sized rooms. With its adjustable thermostat, multiple heat settings, and safety features such as overheat protection and tip-over switch, this heater ensures comfort and safety. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Safety Features 7. Operating Instructions 8. Care & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: 7 fins for efficient heating, adjustable thermostat, multiple heat settings, safety features including overheat protection and tip-over switch.

Feature	Description
Adjustable Thermostat	Allows you to set your desired temperature.
Multiple Heat Settings	Choose between low, medium, and high heat.
Overheat Protection	Automatically shuts off the heater if it gets too hot.
Tip-Over Switch	Turns off the heater if it is knocked over.
Portable Design	Easy to move with built-in wheels.

Installation

Unpack the heater and ensure all parts are included. Place the heater on a flat, stable surface away from flammable materials.

Attach the wheels if not pre-installed.
Ensure the heater is plugged into a suitable electrical outlet.
Keep the heater at least 3 feet away from furniture and curtains.

WARNING! Do not use the heater in wet or damp areas.

First-Time Setup

Plug in the heater and turn it on using the power switch.

Set the desired temperature using the adjustable thermostat.
Select the heat setting according to your preference.
Allow the heater to warm up for a few minutes.

CAUTION! Ensure the heater is on a stable surface before use.

Specifications

Power: 1500 Watts.
Heating Area: Up to 150 square feet.
Dimensions: 24 x 12 x 10 inches.
Weight: 20 lbs.
Material: Steel housing with a durable finish.
Safety Features: Overheat protection, tip-over switch.

Controls and Settings

Access the controls on the front panel: Power switch, adjustable thermostat, and heat setting selector.

Remote: Some models may include a remote control for convenience.

Safety Features

The heater is equipped with multiple safety features to ensure safe operation.

Overheat protection automatically shuts off the heater if it becomes too hot.
The tip-over switch turns off the heater if it is knocked over.
Always ensure the heater is placed on a stable surface.

Operating Instructions

To operate the heater, follow these steps:

Plug the heater into an electrical outlet.
Turn on the power switch.
Adjust the thermostat to your desired temperature.
Select the heat setting.

WARNING! Do not cover the heater while in use.

Care & Cleaning

Unplug the heater before cleaning. Use a dry cloth to wipe the exterior; do not use liquids or aerosols.

CAUTION! Ensure the heater is cool before cleaning.

Regulatory Information

This heater complies with all applicable safety standards. For more information, visit the manufacturer's website.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Heater does not turn on	No power	Check the power outlet and ensure the heater is plugged in.
Insufficient heat	Thermostat setting	Adjust the thermostat to a higher setting.
Heater shuts off unexpectedly	Overheat protection	Ensure the heater is not obstructed and is on a stable surface.

Service: For further assistance, contact customer support.