Pelonis Classic Ceramic Heater Manual

The Pelonis Classic Ceramic Heater is designed to provide efficient heating for small to medium-sized rooms. It features adjustable temperature settings, oscillation for even heat distribution, and a safety tip-over switch. This manual covers key sections including safety information, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. Operation 4. Specifications 5. Safety Information 6. Troubleshooting

Features at a Glance

Key components: Ceramic heating element, adjustable thermostat, oscillation function, safety features.

Feature	Description
Ceramic Heating Element	Provides efficient and quick heating
Adjustable Thermostat	Allows for precise temperature control
Oscillation Function	Distributes heat evenly across the room
Safety Tip-Over Switch	Automatically turns off the heater if tipped over
Overheat Protection	Prevents overheating for added safety

Installation

Unpack the heater and place it on a flat, stable surface away from flammable materials.

Ensure the heater is plugged into a properly grounded outlet.
Do not use an extension cord.
Keep the heater at least 3 feet away from any objects.

WARNING! Do not cover the heater while in use. Ensure proper ventilation.

Operation

To operate the heater, follow these steps:

Plug in the heater and turn it on using the power switch.
Set the desired temperature using the adjustable thermostat.
Activate the oscillation feature if needed for better heat distribution.

CAUTION! Do not leave the heater unattended while in use.

Specifications

Model: Pelonis Classic Ceramic Heater
Power: 1500 Watts
Heating Area: Up to 200 square feet
Dimensions: 10 x 8 x 24 inches
Weight: 5.5 lbs
Safety Features: Tip-over switch, overheat protection

Safety Information

Always follow safety precautions when using the heater:

Do not use the heater in wet or damp areas.
Keep the heater away from children and pets.
Regularly inspect the power cord for damage.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Heater does not turn on	Power supply issue	Check the outlet and power cord.
No heat output	Thermostat setting	Adjust the thermostat to a higher setting.
Heater shuts off unexpectedly	Overheat protection activated	Allow the heater to cool down before restarting.

Reset: Unplug the heater for 10 seconds and plug it back in.