Pelonis Electric Radiator Heater Manual

The Pelonis Electric Radiator Heater is designed to provide efficient heating for your home or office. It features a sleek design, multiple heat settings, and safety features such as overheat protection and a tip-over switch. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Safety Features 7. Operating Instructions 8. Care & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Adjustable thermostat, multiple heat settings, safety tip-over switch, overheat protection, and a quiet operation.

Feature	Description
Adjustable Thermostat	Allows you to set your desired temperature.
Multiple Heat Settings	Choose from low, medium, and high heat options.
Tip-Over Switch	Automatically turns off the heater if it tips over.
Overheat Protection	Prevents the heater from overheating.
Quiet Operation	Designed to operate quietly without disturbing your environment.

Installation

Unpack the heater and place it on a flat, stable surface away from flammable materials.

Ensure the heater is unplugged before installation.
Position the heater in a well-ventilated area.
Keep at least 3 feet of clearance around the heater.
Plug the heater into a suitable electrical outlet.

WARNING! Do not use an extension cord; plug directly into the wall outlet.

First-Time Setup

Power on the heater and adjust the thermostat to your desired setting.

Turn the heater on using the power switch.
Set the thermostat to the desired temperature.
Select the heat setting (low, medium, high).
Monitor the heater to ensure it is functioning properly.

CAUTION! Do not cover the heater while in operation.

Specifications

Power Source: 120V AC, 60Hz.
Heating Element: Oil-filled radiator.
Heat Output: Adjustable from 600W to 1500W.
Dimensions: 24 x 12 x 6 inches.
Weight: 25 lbs.
Safety Features: Overheat protection, tip-over switch.
Warranty: 1 year limited warranty.

Controls and Settings

Access the heater's controls located on the front panel. Use the thermostat dial to set your desired temperature and the heat setting switch to select the heat level.

Remote: Some models may include a remote control for convenience.

Safety Features

The Pelonis Electric Radiator Heater is equipped with several safety features to ensure safe operation.

Tip-over switch: Automatically shuts off the heater if it falls over.
Overheat protection: Turns off the heater if it gets too hot.
Cool-touch exterior: Prevents burns when touching the heater.

Operating Instructions

To operate the heater, follow these steps:

Plug the heater into a wall outlet.
Turn on the power switch.
Adjust the thermostat to your desired temperature.
Select the heat setting.

WARNING! Do not leave the heater unattended while in operation.

Care & Cleaning

Unplug the heater before cleaning. Use a dry cloth to wipe the exterior. Do not use liquids or aerosols.

CAUTION! Ensure the heater is completely cool before cleaning.

Regulatory Information

This heater complies with all applicable safety standards and regulations. For more information, visit the manufacturer's website or contact customer support.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Heater does not turn on	Power source issue	Check if plugged in and outlet is functional.
No heat output	Thermostat setting	Adjust the thermostat to a higher setting.
Heater shuts off unexpectedly	Overheat protection	Ensure vents are not blocked; allow to cool down.
Unusual noise	Internal components	Contact customer support for assistance.

Reset: Unplug the heater for 10 seconds and plug it back in.

Service: For support, contact Pelonis customer service.