Pelonis Electric Radiator Space Heater 7 Fin Oil-Filled HO-0260 Manual

The Pelonis Electric Radiator Space Heater HO-0260 is designed to provide efficient heating with its 7 fin oil-filled design. This heater is perfect for maintaining a comfortable temperature in your home or office during cold weather. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Safety Features 7. Operating Instructions 8. Care & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: 7 fin oil-filled radiator, adjustable thermostat, multiple heat settings, safety tip-over switch, and overheat protection.

Feature	Description
7 Fin Design	Provides efficient and even heating.
Adjustable Thermostat	Allows for precise temperature control.
Multiple Heat Settings	Choose between low, medium, and high heat.
Safety Tip-Over Switch	Automatically turns off heater if tipped over.
Overheat Protection	Prevents overheating for added safety.

Installation

Unpack and inspect contents. Place heater on a flat, stable surface away from flammable materials.

Ensure the heater is on a level surface.
Plug the heater into a grounded outlet.
Do not use extension cords.

WARNING! Keep away from water and do not use in bathrooms.

First-Time Setup

Power on the heater; adjust the thermostat to your desired setting.

Set the heat setting to your preference.
Monitor the room temperature and adjust as necessary.

CAUTION! Ensure the heater is not obstructed by furniture or curtains.

Specifications

Model: HO-0260.
Heating Element: Oil-filled radiator.
Power: 1500 watts.
Heat Settings: Low, Medium, High.
Dimensions: 24 x 12 x 10 inches.
Weight: 25 lbs.
Safety Features: Tip-over switch, overheat protection.

Controls and Settings

Access the controls on the front panel: power switch, thermostat dial, and heat setting selector.

Remote: Some models may include a remote control for convenience.

Safety Features

This heater is equipped with multiple safety features to ensure safe operation.

Tip-over switch: Automatically shuts off the heater if it falls.
Overheat protection: Turns off the heater if it gets too hot.

Operating Instructions

To operate the heater, simply plug it in, turn it on, and adjust the thermostat to your desired temperature.

Turn the power switch to the ON position.
Adjust the thermostat to the desired setting.

Care & Cleaning

Unplug the heater before cleaning. Wipe with a dry cloth; do not use liquids or aerosols.

CAUTION! Ensure the heater is cool before cleaning.

Regulatory Information

This heater complies with all applicable safety standards. For support, visit the manufacturer's website or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Heater does not turn on	Power supply issue	Check outlet and power cord.
No heat	Thermostat setting	Adjust thermostat to a higher setting.
Heater makes noise	Normal operation	Noise may be from expanding metal.

Reset: Unplug for a few minutes and plug back in.