Pelonis Fan Forced Heater with Thermostat Manual

The Pelonis Fan Forced Heater with Thermostat is designed to provide efficient heating for small to medium-sized rooms. It features adjustable thermostat settings, multiple heat settings, and a safety tip-over switch. This manual covers key sections including safety information, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. Operation 4. Specifications 5. Safety Information 6. Troubleshooting

Features at a Glance

Key features include: adjustable thermostat, multiple heat settings (high, low, fan), and a compact design for easy portability.

Feature	Description
Adjustable Thermostat	Allows you to set your desired room temperature.
Multiple Heat Settings	Choose between high, low, and fan-only modes.
Safety Tip-Over Switch	Automatically turns off the heater if it tips over.
Compact Design	Easy to move and store in small spaces.

Installation

Unpack the heater and place it on a flat, stable surface. Ensure there is adequate space around the heater for airflow.

Remove any packaging materials.
Place the heater at least 3 feet away from any flammable materials.
Plug the heater into a grounded outlet.

WARNING! Do not use an extension cord; plug directly into the wall outlet.

Operation

To operate the heater, follow these steps:

Turn the thermostat dial to your desired temperature.
Select the heat setting (high, low, or fan).
Monitor the room temperature and adjust as necessary.

CAUTION! Do not cover the heater while in use.

Specifications

Model: Pelonis Fan Forced Heater with Thermostat.
Power: 1500 Watts.
Voltage: 120V AC.
Heat Settings: High, Low, Fan.
Thermostat: Adjustable.
Safety Features: Tip-over switch, overheat protection.
Dimensions: 12 x 10 x 8 inches.
Weight: 5 lbs.

Safety Information

Always follow safety guidelines when using the heater:

Do not leave the heater unattended while in use.
Keep away from water and moisture.
Ensure the heater is on a stable surface.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Heater does not turn on	No power	Check outlet and plug connection.
Heater is not heating	Thermostat setting	Adjust thermostat to a higher setting.
Heater makes noise	Fan operation	This is normal; ensure no objects are blocking the fan.
Heater shuts off unexpectedly	Overheat protection	Allow the heater to cool down; check for blockages.

Reset: Unplug the heater for 10 seconds, then plug it back in.