Pelonis Model HO-0218 Manual

The Pelonis Model HO-0218 is a versatile and efficient space heater designed to provide warmth and comfort in various settings. It features adjustable temperature settings, a built-in thermostat, and multiple safety features including overheat protection and a tip-over switch. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Power 7. Operating the Heater 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Adjustable thermostat, multiple heat settings, overheat protection, tip-over switch, portable design.

FeatureDescription
Adjustable ThermostatAllows users to set their desired temperature.
Multiple Heat SettingsChoose between low, medium, and high heat.
Overheat ProtectionAutomatically shuts off the heater if it overheats.
Tip-Over SwitchTurns off the heater if it is knocked over.
Portable DesignEasy to move from room to room.

Installation

Unpack the heater and inspect for any damage. Place it on a flat, stable surface away from flammable materials.

  1. Ensure the heater is unplugged before installation.
  2. Choose a location with adequate ventilation.
  3. Keep the heater at least 3 feet away from furniture and curtains.
  4. Plug the heater into a grounded outlet.

WARNING! Do not use extension cords; plug directly into the wall outlet.

First-Time Setup

Power on the heater and adjust the thermostat to your desired setting.

  1. Plug the heater into a wall outlet.
  2. Turn the power switch to the "On" position.
  3. Set the thermostat to your preferred temperature.
  4. Choose the heat setting (low, medium, or high).

CAUTION! Do not leave the heater unattended while in use.

Specifications

Controls and Settings

The heater features a simple control panel with a power switch, thermostat dial, and heat setting buttons.

Power Switch: Turns the heater on and off.

Thermostat Dial: Adjusts the desired temperature.

Heat Setting Buttons: Select between low, medium, and high heat.

Connecting Power

Ensure the heater is plugged into a properly grounded outlet.

  1. Check the power cord for any damage.
  2. Plug the heater directly into the wall outlet.
  3. Do not use extension cords or power strips.

Tip: Ensure the outlet is not overloaded with other devices.

Operating the Heater

To operate the heater, simply turn it on and adjust the settings as needed.

  1. Turn on the heater using the power switch.
  2. Set the desired temperature using the thermostat dial.
  3. Select the heat setting based on your comfort level.
  4. Monitor the heater while in use.

WARNING! Do not cover the heater while it is in operation.

Safety Features

The Pelonis HO-0218 is equipped with multiple safety features to ensure safe operation.

Care & Cleaning

Unplug the heater before cleaning. Use a dry cloth to wipe the exterior; do not use liquids or aerosols.

CAUTION! Ensure the heater is cool before cleaning.

Regulatory Information

This heater complies with all applicable safety standards and regulations. For support, visit the manufacturer's website or contact customer service.

Troubleshooting

SymptomPossible CauseCorrective Action
Heater does not turn onNo powerCheck outlet and power cord.
No heatThermostat settingAdjust thermostat to a higher setting.
Heater shuts off unexpectedlyOverheat protectionAllow heater to cool down; check for obstructions.
Tip-over switch activatedHeater knocked overPlace heater upright and reset.

Reset: Unplug the heater for 10 seconds, then plug it back in.

Service: For assistance, contact customer service.

Pelonis Model HO-0218 Manual © - All Rights Reserved 2026