Pelonis Model HT-1003 Manual

The Pelonis Model HT-1003 is a versatile and efficient heater designed for optimal heating performance in various environments. It features multiple heat settings, a fan-only mode, and a built-in safety shut-off to prevent overheating. This manual provides essential information on safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Safety Information 7. Operating Instructions 8. Care & Cleaning 9. Troubleshooting

Features at a Glance

Key features include adjustable thermostat, oscillation function, and a compact design for easy portability.

Feature	Description
Adjustable Thermostat	Allows you to set your desired temperature.
Oscillation	Distributes heat evenly across a wider area.
Fan-Only Mode	Provides air circulation without heating.
Safety Shut-Off	Automatically turns off the heater if it overheats.
Compact Design	Easy to move and store.

Installation

Unpack the heater and place it on a flat, stable surface away from flammable materials.

Ensure the heater is unplugged before installation.
Position the heater in a well-ventilated area.
Keep a minimum distance of 3 feet from walls and furniture.
Plug the heater into a grounded outlet.

WARNING! Do not use the heater in wet or damp areas.

First-Time Setup

Plug in the heater and set the desired temperature using the adjustable thermostat.

Turn the heater on using the power switch.
Select the heat setting based on your preference.
Activate the oscillation feature if desired.

CAUTION! Ensure the heater is on a stable surface during operation.

Specifications

Model: Pelonis HT-1003.
Power Source: 120V AC.
Heat Settings: Low, Medium, High.
Oscillation: Yes.
Safety Features: Overheat protection, tip-over switch.
Dimensions: 12 x 10 x 8 inches.
Weight: 5 lbs.

Controls and Settings

The heater features a simple control panel with a power switch, thermostat dial, and oscillation button.

Power Switch: Turns the heater on and off.

Thermostat Dial: Adjusts the desired temperature.

Oscillation Button: Activates or deactivates the oscillation feature.

Safety Information

Always follow safety guidelines to prevent accidents and injuries.

Do not leave the heater unattended while in use.
Keep away from children and pets.
Do not use with an extension cord.

Operating Instructions

To operate the heater, follow the steps outlined in the first-time setup section.

Turn on the heater and select your desired heat setting.
Adjust the thermostat as needed for comfort.
Use the oscillation feature for wider heat distribution.

Care & Cleaning

Unplug the heater before cleaning. Use a soft, dry cloth to wipe the exterior.

CAUTION! Do not use liquids or abrasive cleaners.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Heater does not turn on	Power source issue	Check outlet and power cord.
No heat output	Incorrect setting	Adjust thermostat and heat setting.
Overheating	Blocked air intake	Ensure air vents are clear.
Unusual noise	Loose components	Inspect for loose parts and tighten.

Reset: Unplug the heater for 10 seconds and plug it back in.

Service: For assistance, contact customer support.