Pelonis NT15 13C Owners Manual

The Pelonis NT15 13C is a versatile and efficient heater designed for home use. It features a compact design, adjustable thermostat, and multiple heat settings to provide optimal comfort in any room. The heater is equipped with safety features such as overheat protection and a tip-over switch, ensuring safe operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Power 7. Operating the Heater 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Adjustable thermostat, multiple heat settings, compact design, safety features including overheat protection and tip-over switch.

Feature	Description
Adjustable Thermostat	Allows you to set your desired temperature.
Multiple Heat Settings	Choose from low, medium, or high heat.
Compact Design	Easy to move and store in small spaces.
Overheat Protection	Automatically shuts off the heater if it gets too hot.
Tip-Over Switch	Turns off the heater if it is knocked over.

Installation

Unpack the heater and place it on a flat, stable surface away from flammable materials.

Ensure the heater is unplugged before installation.
Position the heater in the desired location, ensuring adequate airflow.
Plug the heater into a standard electrical outlet.

WARNING! Do not use an extension cord; plug directly into the wall outlet.

First-Time Setup

Power on the heater and adjust the thermostat to your desired temperature.

Select the heat setting: low, medium, or high.
Monitor the room temperature and adjust as necessary.

CAUTION! Keep the heater away from water and moisture.

Specifications

Model: Pelonis NT15 13C.
Power Output: 1500 watts.
Heat Settings: Low, Medium, High.
Thermostat: Adjustable.
Safety Features: Overheat protection, tip-over switch.
Dimensions: 12 x 10 x 8 inches.
Weight: 5 lbs.
Power Source: 120V AC.

Controls and Settings

Access the heater's controls on the front panel: Power, Thermostat, Heat Settings.

Remote: If applicable, use the remote to adjust settings from a distance.

Connecting Power

Ensure the heater is plugged into a suitable electrical outlet.

Check that the outlet is functioning properly.
Do not use with a power strip or extension cord.

Tip: Always unplug the heater when not in use.

Operating the Heater

To turn on the heater, press the power button and select your desired heat setting.

Adjust the thermostat to your comfort level.
Monitor the heater during operation for safety.

WARNING! Never leave the heater unattended while in use.

Accessibility Features

The heater is designed for ease of use, with clearly labeled controls and settings.

Care & Cleaning

Unplug the heater before cleaning. Use a dry cloth to wipe the exterior; do not use liquids.

CAUTION! Ensure the heater is cool before cleaning.

Regulatory Information

This heater complies with all applicable safety standards and regulations. For support, visit the manufacturer's website or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Heater does not turn on	Power source issue	Check outlet and power cord.
No heat	Settings issue	Ensure heat setting is selected.
Overheating	Blocked airflow	Ensure vents are clear.
Unusual noise	Loose parts	Inspect for loose components.

Reset: Unplug for 10 seconds and plug back in.

Service: Contact customer service for further assistance.