Pelonis Safe T Furnace Model 1500W Manual

The Pelonis Safe T Furnace Model 1500W is a powerful and efficient heating solution designed for home and office use. This electric heater features multiple safety mechanisms, including overheat protection, a tip-over switch, and a built-in thermostat for temperature control. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Operating Instructions 7. Safety Features 8. Care & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: 1500W heating element, adjustable thermostat, safety tip-over switch, overheat protection, and portable design.

Feature	Description
1500W Heating Element	Provides efficient heating for medium to large rooms.
Adjustable Thermostat	Allows users to set their desired temperature.
Tip-Over Switch	Automatically shuts off the heater if it is knocked over.
Overheat Protection	Prevents the heater from overheating for added safety.
Portable Design	Easy to move from room to room with built-in handle.

Installation

Unpack and inspect contents. Place the heater on a flat, stable surface away from flammable materials.

Ensure the heater is unplugged before installation.
Position the heater at least 3 feet away from any objects or walls.
Plug the heater into a standard electrical outlet.

WARNING! Do not use an extension cord; connect directly to a wall outlet.

First-Time Setup

Power on the heater; adjust the thermostat to your desired temperature.

Set the heater to the desired heat setting using the control knob.
Monitor the room temperature and adjust as necessary.

CAUTION! Ensure the heater is not obstructed by furniture or other items.

Specifications

Model: Pelonis Safe T Furnace 1500W.
Power Consumption: 1500 Watts.
Heating Area: Up to 150 square feet.
Safety Features: Tip-over switch, overheat protection.
Dimensions: 12 x 10 x 8 inches.
Weight: 5.5 lbs.
Power Source: 120V AC.

Controls and Settings

Access the heater's settings via the control knob located on the front panel.

Settings: Heat setting (Low, Medium, High), Thermostat adjustment.

Operating Instructions

To operate the heater, follow these steps:

Turn the heater on using the control knob.
Adjust the thermostat to your preferred temperature.
Monitor the heater for any unusual sounds or smells.

Tip: For optimal performance, keep the heater clean and free of dust.

Safety Features

The Pelonis Safe T Furnace is equipped with several safety features to ensure safe operation:

Tip-over switch that automatically turns off the heater if it falls.
Overheat protection that prevents the heater from reaching unsafe temperatures.
Cool-touch exterior to prevent burns.

Care & Cleaning

Unplug the heater before cleaning. Use a dry cloth to wipe the exterior; do not use liquids or aerosols.

CAUTION! Ensure the heater is cool before cleaning.

Regulatory Information

This heater complies with all applicable safety standards. For support, visit the Pelonis website or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Heater does not turn on	Power supply issue	Check if plugged in and outlet is functional.
No heat output	Thermostat setting	Adjust the thermostat to a higher setting.
Heater shuts off unexpectedly	Overheat protection activated	Allow the heater to cool down before restarting.
Unusual noise	Loose parts	Inspect for loose components; contact support if needed.

Reset: Unplug the heater for 10 seconds and plug it back in.

Service: For assistance, contact Pelonis customer service.