Pelonis Space Ceramic Heater Manual

The Pelonis Space Ceramic Heater is designed to provide efficient heating for small to medium-sized rooms. It features adjustable thermostat settings, multiple heat settings, and a safety tip-over switch. The heater operates quietly and is equipped with a built-in handle for easy portability. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Safety Information 7. Operating Instructions 8. Care & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Adjustable thermostat, multiple heat settings, safety tip-over switch, portable design.

Feature	Description
Adjustable Thermostat	Allows you to set your desired temperature.
Multiple Heat Settings	Choose between low, medium, and high heat.
Safety Tip-Over Switch	Automatically turns off the heater if it tips over.
Portable Design	Built-in handle for easy transport.
Quiet Operation	Designed to operate quietly for minimal disturbance.

Installation

Unpack the heater and place it on a flat, stable surface away from flammable materials.

Ensure the heater is unplugged before installation.
Position the heater at least 3 feet away from any obstructions.
Plug the heater into a grounded outlet.

WARNING! Do not use the heater in wet or damp areas.

First-Time Setup

Power on the heater and adjust the thermostat to your desired setting.

Turn the heater on using the power switch.
Set the desired temperature using the adjustable thermostat.
Select your preferred heat setting.

CAUTION! Ensure the heater is placed on a stable surface.

Specifications

Power Supply: 120V AC, 60Hz.
Heating Element: Ceramic.
Heat Settings: Low, Medium, High.
Safety Features: Tip-over switch, overheat protection.
Dimensions: 12 x 8 x 16 inches.
Weight: 5.5 lbs.

Controls and Settings

Access the heater's controls on the front panel. The controls include the power switch, thermostat dial, and heat setting buttons.

Safety Information

Always operate the heater on a flat, stable surface. Do not cover the heater while in use. Keep away from water and flammable materials.

Operating Instructions

To operate the heater, turn it on using the power switch, adjust the thermostat, and select your heat setting.

Care & Cleaning

Unplug the heater before cleaning. Wipe the exterior with a dry cloth. Do not use liquids or aerosols.

CAUTION! Ensure the heater is cool before cleaning.

Regulatory Information

This heater complies with all applicable safety standards. For support, visit www.pelonis.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Heater does not turn on	Power supply issue	Check outlet and power cord.
No heat	Incorrect setting	Verify heat setting and thermostat.
Overheating	Blocked air intake	Ensure air intake is clear.
Unusual noise	Loose parts	Inspect for loose components.

Reset: Unplug the heater for 10 seconds and plug it back in.

Service: For assistance, contact customer service at 1-800-555-0199.