Pelonis Water Dispenser Manual

The Pelonis Water Dispenser is designed to provide you with hot and cold water at your convenience. It features a sleek design, easy-to-use controls, and a built-in safety mechanism to prevent overheating. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Bottles 7. Using the Dispenser 8. Cleaning and Maintenance 9. Troubleshooting

Features at a Glance

Key components: Hot water tap, cold water tap, removable drip tray, adjustable temperature settings, and child safety lock.

Feature	Description
Hot Water Tap	Dispenses hot water for tea and instant meals.
Cold Water Tap	Dispenses cold water for refreshing drinks.
Child Safety Lock	Prevents accidental dispensing of hot water.
Removable Drip Tray	Easy to clean and maintain.
Temperature Control	Adjustable settings for hot and cold water.

Installation

Unpack and inspect contents. Place the dispenser on a flat, stable surface.

Connect to a power source: Plug the dispenser into a grounded outlet.
Install water bottle: Place the bottle on the top of the dispenser, ensuring it fits securely.
Allow the dispenser to cool down before first use.

WARNING! Ensure the dispenser is placed away from direct sunlight and heat sources.

First-Time Setup

Power on the dispenser; allow it to heat and cool the water for about 30 minutes before use.

Check water levels: Ensure the water bottle is properly installed.
Adjust temperature settings: Set your desired hot and cold temperatures.
Test the taps: Dispense a small amount of water to ensure functionality.

CAUTION! Avoid touching the hot water tap without using the safety lock.

Specifications

Model: Pelonis Water Dispenser.
Dimensions: 12 x 12 x 38 inches.
Weight: 30 lbs.
Power Supply: 110V AC.
Heating Capacity: 5 liters/hour.
Cooling Capacity: 2 liters/hour.
Material: Stainless steel and plastic.
Safety Features: Child safety lock and overheat protection.

Controls and Settings

Access the temperature settings via the control panel located on the front of the dispenser. The panel includes buttons for hot and cold water, as well as a child safety lock.

Connecting Water Bottles

Ensure the dispenser is unplugged before connecting or disconnecting water bottles.

Remove the cap from the water bottle.
Invert the bottle and place it onto the dispenser.
Ensure the bottle is seated properly to avoid leaks.

Tip: Use only compatible water bottles for optimal performance.

Using the Dispenser

To dispense water, press the corresponding tap button. For hot water, ensure the child safety lock is disengaged.

Press the hot or cold water tap to dispense.
Release the tap to stop the flow.
Always use caution when dispensing hot water.

WARNING! Do not attempt to dispense water while the dispenser is being cleaned.

Cleaning and Maintenance

Regular cleaning is essential for optimal performance. Unplug the dispenser before cleaning.

Wipe the exterior with a damp cloth.
Clean the drip tray regularly to prevent buildup.
Descale the water reservoir every six months.

CAUTION! Do not use abrasive cleaners or solvents.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No water dispensed	Empty bottle or improper installation	Check water bottle; reinstall if necessary.
Hot water not heating	Power supply issue	Ensure the dispenser is plugged in and the outlet is functional.
Water leaks	Poor bottle connection	Recheck bottle installation; ensure it's seated properly.
Unusual noise	Air in the system	Allow the dispenser to run for a few minutes to clear air.

Service: For further assistance, contact Pelonis customer support.