User Manual Pelonis Heater

The Pelonis Heater is designed to provide efficient heating for your home or office. With its advanced features, including adjustable temperature settings, oscillation, and safety mechanisms, it ensures a comfortable environment while prioritizing safety. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Power 7. Operating the Heater 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Adjustable thermostat, oscillation feature, remote control, safety tip-over switch, overheat protection, and energy-saving modes.

Feature	Description
Adjustable Thermostat	Allows you to set your desired temperature for optimal comfort.
Oscillation	Distributes heat evenly across a wider area.
Remote Control	Conveniently adjust settings from a distance.
Safety Tip-Over Switch	Automatically turns off the heater if it tips over.
Overheat Protection	Prevents overheating for added safety.
Energy-Saving Modes	Helps reduce energy consumption while maintaining comfort.

Installation

Unpack the heater and inspect for any damage. Place it on a flat, stable surface away from flammable materials.

Ensure the heater is unplugged before installation.
Position the heater in a well-ventilated area.
Keep at least 3 feet of clearance around the heater.
Plug the heater into a suitable electrical outlet.

WARNING! Do not use an extension cord; connect directly to a wall outlet.

First-Time Setup

Power on the heater; set your desired temperature using the thermostat.

Press the power button to turn on the heater.
Adjust the thermostat to your preferred temperature.
Activate oscillation if desired by pressing the oscillation button.

CAUTION! Ensure the heater is placed on a stable surface to prevent tipping.

Specifications

Power Output: 1500 watts.
Heating Area: Up to 300 square feet.
Thermostat: Adjustable from 60°F to 90°F.
Dimensions: 24 x 10 x 10 inches.
Weight: 8.5 lbs.
Safety Features: Tip-over switch, overheat protection.
Power Source: 120V AC, 60Hz.

Controls and Settings

Access settings via the control panel or remote. Controls include power, temperature adjustment, oscillation, and timer settings.

Remote: Power, temperature up/down, oscillation, timer.

Timer: Set the heater to operate for a specified duration before automatically turning off.

Connecting Power

Ensure the heater is connected to a suitable power outlet. Avoid using extension cords.

Check the power cord for any damage before plugging in.
Plug the heater directly into a wall outlet.
Ensure the outlet is rated for the heater's power requirements.

Tip: Use a dedicated circuit for optimal performance.

Operating the Heater

Follow the instructions to operate the heater effectively.

Turn on the heater using the power button.
Set your desired temperature using the thermostat.
Activate oscillation for wider heat distribution.
Monitor the heater's operation and adjust settings as needed.

WARNING! Do not leave the heater unattended while in operation.

Safety Features

The Pelonis Heater is equipped with multiple safety features to ensure safe operation.

Tip-over switch: Automatically shuts off the heater if it tips over.
Overheat protection: Prevents the heater from overheating.
Cool-touch housing: Ensures the exterior remains safe to touch.

Care & Cleaning

Unplug the heater before cleaning. Use a dry cloth to wipe the exterior; do not use liquids or aerosols.

CAUTION! Ensure the heater is completely cool before cleaning.

Regulatory Information

This heater complies with all applicable safety standards. For support, visit the Pelonis website or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Heater does not turn on	Power supply issue	Check power outlet and ensure heater is plugged in.
No heat output	Thermostat setting	Adjust the thermostat to a higher temperature.
Heater shuts off unexpectedly	Overheat protection activated	Allow the heater to cool down before restarting.
Noise during operation	Fan operation	This is normal; ensure the heater is on a stable surface.

Reset: Unplug the heater for a few minutes to reset.

Service: For assistance, contact Pelonis customer service.